蒸汽系统
  蒸汽疏水阀
  蒸气减压阀
  蒸汽安全阀
  蒸气柱塞阀
  波纹管截止阀
  温度调节阀
  汽水分离器
  蒸汽电磁阀
  锻钢阀门
 
水路系统
  蝶阀
   球阀
   截止阀
   闸阀
   止回阀
   浮球阀
   过滤器
   减压/稳压阀
   
   
   
   
   
     自由浮球疏水阀:
 
   
                                                   
                 
                 CS41H -16C
                法兰自由浮球疏水阀

      CS11H -16C
    法兰自由浮球疏水阀
 







部件名称 (Component name )
材料(Materials)
 

阀体、阀盖(Body and Cap )

碳钢 WCB
 
浮球 (Float Ball )
不锈钢
(austenitic stainless steel)

隔罩、过滤网(Caulking shell and Screenl)

不锈钢
austenitic stainless steel)
阀座 (seat )
不锈钢
(chrome stainless steel)
 
   

最低工作压力
Minimum operating pressure
0.01MPa 节能效果
Metre effects
15-40%
最小过泠度≈
Minimum subcooled temperature
0℃ 铸铁阀体最高允许温度
Max Temperature for Cast-iron Body
200℃
有负荷漏汽率≈
Rate of Load steam loss
0 铸钢阀体最高允许温度
Max Temperature for Cast-steel Body
425℃
最高允许背压率
Rate of Load steam loss
80~85% 适用介质
suita ble Medium
蒸汽、凝结水
Steam Condensate Wate
 
独特点:Unique Featres
本产品采用自动防气锁装置的先进Y系列元件和高精度研磨的不锈钢空心浮球制造,具有高效节能,经久耐用的优越性能。
This product adopting automatic protection air lock and the advanced Yseries component and stainless steel for with hiht accuracy grinding with hollow floating,having energy conservation efficiently,durable service ascendant function.
优点:Advantage
能连续排放饱和凝洁水,加热设备内不会有水积聚,从而获得最高的加热效率。
蒸汽压力变化时不受影响,工作连续,性能稳定。
漏汽率小:产品的1cr18Ni9Ti浮球全部采用先进研磨工艺制造,浮球精度高,密封性能好。
确保加热设备温度稳定。Y型元件能自动排除不凝洁冷、热气体,杜绝气锁现象,提高加热效率。
使用寿命长。高精度浮球的整个球面都可以做密封面,无集中磨损。
过冷度小,背压率高。在加热设备和凝结水回收系统工程上使用,更显其优越性能。
Exhausting continuously the saturation condensed water,heating equipments can't accumulate the water,acquired the highest heating efficiency.
Uninfluenced when steam pressure change,working continuously,the function stabilizintg
The little rate of air leakage,the1 cr18Ni9Ti of Yingqiao's series products floating all adopt advanced grinds and craft,floating accuracyhigh,sealed well with capability.
Insuring the heating equipments/s temperature stabilizes.The Ytype component can exclude automatically,not coagulated cold,hot gas,eradicate air lock phenomenon,improve heats efficiency.
The long service life.The whole sphere of high precision floating can be done the sealant.have no the concentration wear and tear.
Low undercooling degree,the rate high back press.On the heating equipments with condensed water and the recovery system engineering,even show its ascendant function.
工作原理:Principle of Work
  该阀门利用浮力原理,浮球根据冻结水量的多少,随水位于变化而作升降自动调节阀座孔的开度,连续排放凝结水。当凝结水停止进入时,浮球靠自重降到底部,回到关闭位置,排水停止。由于排水阀座孔总是在凝结水位以下,形成水封、水汽自然分离,达到无蒸汽泄漏。
  According to the principle of buoyancy, floating ball fluctuates according to condensation water level, lt can automatically regulate jaw
opening of valve seat aperture, draining condensation water, When condensate stops flooding in, floating ball back to the bottom based on its
own weight,valve closed and draining stopped.
  Due to water closing, in which valve seat aperture below the condensate level,steam and water separated automatically, noair leakage.
|汽水分离器|浮球疏水阀|圆盘疏水阀|吊桶疏水阀
 

地址: 北京市丰台科技园航丰路9号颐安鑫鼎科技大厦108室 电话:010-59799400 传真:010-65800774

© 2008 北京文达伟业机电设备有限公司所有