蒸汽系统
  蒸汽疏水阀
  蒸气减压阀
  蒸汽安全阀
  蒸气柱塞阀
  波纹管截止阀
  温度调节阀
  汽水分离器
  蒸汽电磁阀
  锻钢阀门
 
水路系统
  蝶阀
   球阀
   截止阀
   闸阀
   止回阀
   浮球阀
   过滤器
   减压/稳压阀
   
   
   
   
   
      到吊桶疏水阀
 
 
CS45H-16C
CS15H-16C
 
 
 
主要性能参数:Main Speciflcation
公称压力Nominal pressure:
1.6Mpa/2.5Mpa/4.0Mpa
壳体试验压力Shell test pressure:
2.4Mpa/3.8Mpa/6.0Mpa

最高工作温度:250℃/425℃
Maximium wording temp(TMO)

过冷度≤3℃
Condensate depression
最高允许温度:425℃/475℃
Max temp
最高背压率:85%
Max backing pressure rate
 
主要零件材料表:Materials for main parts  
名称
Name
材料
Material
阀体、阀盖
Body、Bonnet
WCB/WC6/304
阀座、阀芯
Body、Bonnet
STL
吊桶
Bucketfloat
304/316
杠杆
lever
304/316
过滤网
Gauze filter
304/316
 
用途:Utility
该阀广泛用于石油、化工、电力、纺织印染、等行业的各种蒸汽加热设备、蒸汽管网、凝结水回收工程和低过热蒸汽工况。它能迅速、自动排除结水,有效地阻止蒸汽泄漏。
It is widely in sectors of petroleum,chemical,power,printing and dyeing textile for heating and steaming system,condensation water recyeling and over heating steam projects.It removes condensation water and stop leasage.
优点:Advantage
钴、铬、钨合金密封面,使用寿命长。阀座和球形阀芯采用优质合金,耐磨损,耐腐蚀,经久耐用。
球形阀芯密封好。采用磨削加工并在机械装置上与阀座配研的球形阀芯,密封性能好,在工作时无集中磨损,能延长使用寿命。
汽水分离可靠。倒置桶向下的开口和阀座孔均处于液封状态,蒸汽不能到达被水密封的阀孔,能可靠地将水、汽分离。
排空气性能好。倒置桶上没有溢出排气孔,可有效地阻止蒸汽汽锁、空气所堵现象
背压高(85%)有利于在凝结水回收系统中使用。
耐水击。开口桶结构不会由于水击现象而遭损坏。
维护简便。内部零件采用不锈钢制造,均安装在阀盖上,并没有过滤网装置,是常维护简便。
可选择有内装式止回阀装置。带有内装止回阀是一种适用在低过热汽工况上的理想疏水阀
The cover uses cobalt-chromium-tungsten alloy,featuring long durability.Unit base and globe valve spool are made out of quality alloy,which boasts anti-abrasive ability and good corrosion resistance.
Globe valve featuring good tightness.Globe valve spool,which uses abrasive machining featuring good tightness,non-focus abrasion procedure can extend using durability.
Reliable seperation ability between air and water.inverted tand and valve base liquid blocded to stop steam from arriving valve ga-te,seperating the steam and water.
Good air-out ability. Air-out hole on the tank can avoid steam and block.
High backing pressure.Used in condensation water recycling system.
Easy maintenance Inner parts are made out of stainless steel,it also has screen for easy maintenance.
Built-in check valve system.It is ideal valve for steam and over-heating steam.
工作原理:Principle of Work
  倒置桶疏水阀的开启和关闭是根据凝结水和蒸汽的密度差来动作的,凝结水可直接驱动疏水阀启闭,其动作准确,可靠性高。
  Open and shut-down is operated by the density variati on bet ween condensation water and steam,Condesation water can drive valve directly,featuring precision and reliability.
   
|汽水分离器|浮球疏水阀|圆盘疏水阀|吊桶疏水阀
 

地址: 北京市丰台科技园航丰路9号颐安鑫鼎科技大厦108室 电话:010-59799400 传真:010-65800774

© 2008 北京文达伟业机电设备有限公司所有